Product Features
FDA Cleared as a Medical Device
˙
Featuring LED Infrared lights and heat treatment
˙
Emits 408 Low-Level Laser Lights to desired areas for pain relief
˙
May be used on the neck, shoulders, lower back, knees, ankles and all joints
˙
Lightweight, flexible silicone material that conforms to the shape of your body for ease of use
˙
2 Built-in safety features help prevent burns
˙
Adheres securely to the skin and provides effective pain relief
˙
Consistent use 1-2 times a day for 30 minutes provides pain relief.
˙
30 minutes has been proven to be the optimal duration of treatment by various clinical studies.*
˙
The GCOOP LAPY V features a total of 408 lights with 650nm Low-Level Laser Lights and LED lights, and 870nm Infrared lights.
˙
Medical Device intended to reduce and help manage pain.*
* These statements have not been evaluated by the Food and Drug Administration.
Neck
Lower Back
Knees
Shoulders
Arms
Wrists
Ankles
Product Overview
˙
May be used on wider/larger areas of the body due to the high density of light and larger size of the device.
˙
Lightweight silicone material folds easily into a compact size for convenient storage or travel.
˙
Relieves pain by illuminating the affected area with 408 lights.
˙
Sweat-resistant silicone material to prevent damage or malfunction.
˙
Automatic temperature control functions are built in to prevent burns.
˙
Automatic temperature controls keeps temperature at or under 41°C (compared to 45°C limit for the GCOOP 402 VIP) to prevent burns.
˙
Designed with 2 built-in safety features for automatic temperature control.
˙
Adheres securely to the skin and provides effective pain relief.
˙
May be used with an external battery, which enhances portability and ease of use.
※ Specification for External Batteries for this Product (sold separately in your local area)
- Capacity: DC 3.7V / 20000mAh / 74Wh
- Output: DC 12 1.5A
* External battery that supports QC 3.0 (Quick Charge 3.0)
* External battery output DC 12V from USB-A port
※ External Battery Cable (sold separately)
- USB-A to DC Jack (5.5 x 2.1mm) Trigger Cable
(QC 3.0 trigger signal generated for DC 12V 1.5A power output)
Product Specifications
˙ Device Name
GCOOP LAPY V
˙ Net Wt. and Qty
3.6 lb (1.65 kg) / 1 Device
˙ Product Weight
4.1 lb (1.875 kg)
˙ Power Consumption
12VA
˙ Light Output Power & Wavelength
LED: 4.5mW/cm2, 650nm
2.0mW/cm2, 870nm
Laser diode: 3.0mW/cm2, 650nm
˙ Distributed by
GCOOP USA Corp.
˙ Country of Origin
Republic of Korea
˙
Those who are experiencing joint pain.
˙
Those who are experiencing postpartum joint pain.
˙
Those who stand for long periods of time or are very active.
˙
Those who golf, hike, or enjoy other out door activities.
˙
Those who experience pain in specific areas due to various physical activities.
Display
(Temperature, Time Display)
‘Start Button’
‘Auto Button’
‘Stop Button’
Controller
01.
Connect the power cord (on the AC Adaptor) to an outlet.
02.
Connect the DC jack of AC Adaptor to the Smart Controller.
03.
Place the GCOOP LAPY V device on desired area.
04.
Press the ‘Start Button’ or the ‘Auto Button’.
05.
If necessary, press the ‘Stop Button’ to pause operations.
06.
After use, remove the power cord from the outlet.
07.
For detailed instructions, refer to the ‘Detailed Instructions for Proper Use’ section of the manual.
※ The lights pictured inside the yellow borders are operating normally. They are Infrared LED lights, and the light is invisible to the human eye. Do not look directly into the lights.
Detailed Instructions for Proper Use
1.
Wrap the GCOOP LAPY V around the desired area and secure it gently with the band provided. After securing the band, connect the DC jack (on the AC Adaptor) to the Smart Controller and the power cord (on AC Adaptor) to the outlet. (Do not use the device on top of clothes.) If the band is too tight it may cause pain or discomfort and must be used gently, only to secure the device to the desired area.
2.
When the ‘Start Button’ is pressed the laser diodes and LED lights are emitted directly onto the desired area. Use the device directly on bare skin. If it feels too hot, uncomfortable, or sweating occurs, place a thin white cloth over the skin and place the device on top.
3.
If only the ‘Start Button’ is pressed, the device will operate up to 112.8°F/44.9°C and 111.2°F/44°C will be displayed on the screen. Once the device reaches 113℉/45℃ the lasers will stop emitting light temporarily so that the device can cool down. After the device cools down, it will display 105.8℉/41℃ on the screen and begin emitting laser lights once again. During use, the device will continue to alternate between 105.8℉/41℃ and 113℉/45℃. When the accumulated laser irradiation time has elapsed for 30 minutes, it will resume operation after 10 minute break for user safety.
4.
If the ‘Auto Button’ is pressed, the display screen will show a timer of 30 minutes that will decrease as each minute goes by. The laser lights will repeatedly go on and off during use and after 30 minutes the device will sound to signal that the timer is up. The timer will then disappear from the screen. The actual operating time of the device, from start to finish, can vary from 40 minutes to 10 hours based on the condition of the user.
(The timer does not continue to run when the device turns off to cool down. The timer resumes running when the device turns back on and therefore, the actual operating time may be longer than 30 minutes.)
Main Body
Belt Front
Belt Back
Velcro
Leather Strap
Arm / Knee
Position the light source of the main body so that it is visible.
Position the front side of the belt, on the main body so that it is visible.
Insert the left end of the belt into the hole on the left side of the main body, and fold, so that it attaches to the Velcro.
After placing the main body of the device on the area to be treated, wrap the belt around the device and secure it to the Velcro.
Stomach / Back
Position the light source of the main body so that it is visible.
Position the front side of the belt, on the main body so that it is visible.
Insert the left end of the belt into the hole on the left side of the main body, and fold, so that it attaches to the Velcro.
After placing the main body of the device on the waist (stomach/back), loop the belt through the hole on the other side of the device and fold over.
Attach the part of the belt that has been folded over, to the Velcro.
Storage
Fold the main body, as shown in the picture above, to store.
Fold the belt in half first. Then fold into a zigzag shape, as shown in the picture above.
Carefully organize the power adapter and power cable.
Place the power adapter and power cable into the case, as shown in the picture above, and place the main body inside as well.
Storage and Maintenance
1.
Store in a cool, dry place. (Storage area must not be wet/humid.)
2.
Do not store near chemical products or areas where gas is produced or stored.
3.
After use, wipe the laser emission site with a dry cloth. If there are any foreign materials on the laser diodes, wet a cotton swab with rubbing alcohol, and gently wipe off.
4.
Keep out of reach of children.
5.
After use, remove the power cord from the outlet and store in a safe place.
Please Note the Following
1.
The heat produced by the GCOOP LAPY V is not from the heating wires, but rather from the semi-conductor itself. It may cause sweating during use, but this is normal and expected.
2.
This device is manufactured using a special ergonomic silicon material. It may expand during use due to the temperature increase, but will contract back to normal size as the temperature decreases. As the device contracts it may make certain sounds. (However, this is normal and does not qualify for warranty.)
3.
If the device is used on a heating pad or heating mat, safety settings may be triggered due to the external heat. If the safety settings are triggered, it may cause the lights to go off. If using indoors the device will return back to normal. Do not use this device while on a heating pad or mattress as it may cause damage to the device.
4.
The GCOOP LAPY V has 4 sides. During use, the Module Lights fold and unfold which also causes certain sounds. This is normal as it is caused by the movement of the device and is therefore, not eligible for warranty.
5.
The GCOOP LAPY V is composed of 408 LLLT semi-conductors.
[Laser diodes: 650nm (18EA) + LED 650nm (360EA) + LED 870nm (30EA)]
- The 650nm Laser diodes and 650nm LED lights are illuminated with red light when used.
- The 870nm LED is an infrared semiconductor. Infrared light is invisible, even if you don't see the light during use rest assured that the device is working properly.
※
The user is responsible for device damage caused by improper handling, storage, usage, and or disregard for the instructions and safety measures provided. If the device is damaged due to any of the reasons listed above, it will not be eligible for warranty even during the warranty period.
Carefully read all safety precautions and warnings prior to use
1.
Those who have especially sensitive skin or the elderly should place a thin white cloth, or towel over their skin when using this device to prevent skin burns. If the device feels too hot, remove immediately and stop using.
2.
If you sweat while using the device, place a thin white cloth, or towel over the skin. Wipe the device with a dry cloth and thoroughly rinse the skin with water after use.(Warning: Skin may darken if not rinsed after using the device.)
3.
Avoid shining laser light in eyes or face.(Not recommended for face or areas of the body other than joints.)
4.
Do not use this device while on a heating pad or heating mat. The heat may shock or damage the device. (If the device is damaged due to use on a heating pad or mat, the user irresponsible for repair/replacement costs.)
5.
Do not cover the device with a blanket or throw cover while it is in use. (It may cause the temperature sensor to malfunction.) If you must use a blanket while using the device, make sure that the controller which contains the temperature sensor is not covered by or wrapped in the blanket.
6.
Do not use with any creams, ointments, or rubs, prescription or other, as it may cause severe damage to the device. (If the device is damaged due to use with any creams, ointments, or rubs, the user is responsible for repair/replacement costs.)
7.
Do not lay on top of the device when using it on the buttocks or lower back as it may cause damage to the device. [If the device is damaged due to improper use (i.e., laying on top of it, etc.) the user is responsible for repair/replacement costs.]
8.
Do not use in humid areas.
9.
If the device is malfunctioning and in need of repair, do not attempt to disassemble it or repair it yourself. If the device is disassembled by unauthorized persons, the device will no longer be eligible for warranty.
10.
Handle the device gently and take care not to drop it or use excessive force.
11.
Do not use excessive force when handing the cable that connects to the main body of the device.
1)
If you observe signs of damage due to improper handling (Display screen malfunction and blinking of lights) stop using immediately and contact the distributor.
2)
If you continue to use the device after observing the signs of damage mentioned above, you do so at your own risk and may cause severe damage to the device as well.
12.
Do not handle the device, the power cord, controller, or outlet while hands are wet.
13.
If the LAPY V fails to reach 45 degrees and stops operating after 30 minutes of use, press the stop button and press the start button again to use the product at the previously paused temperature. Use it in an environment where the room temperature is not low. When using the product, cover it with either clothes, towels, or blankets to use it warmly.
LASER WARNING
*
This product has lasers. Avoid looking at lasers directly or pointing the lasers directly into eyes. May cause vision impairment.
**
We are not liable for pro
